Scania VCI1 Diagnostic Tool 斯堪尼亚诊断工具 Trucks Buses

    |     2016年8月7日   |   Scania VCI3   |     0 条评论   |    9287

斯堪尼亚 Scania 所有软件和适配器都有 需要的朋友在线联系

VCI1 is a diagnostic tool to work with older Scania trucks and buses from 1995 till 2004. This tool combined with PC and Scania software can do diagnostics and programming.

Language: English Only


VCI1 Diagnostic Tool For Scania Trucks and Buses of 3 and 4 Series


VCI1 supports diagnostic systems of Scania trucks and buses of 3 and 4 series. VCI1 works with Scania SD2 and Scania SP2 software. (SD – Scania Diagnos software, SP – Scania Programmer software. )


VCI1 supports all systems on all vehicles made by Scania from 1995 till 2004 if you need a tool to work with newer models check our shop for Scania VCI2 tool. This tool requires PC with RS232 (COM) port, or USB->RS232 adapter.


Supported Systems:

APS – Air processing system;
BWS – Body work system;
BCS – Bus chassis system;
EBS – Brake management system;
EEC – Exhaust emission control system;
EMS – Engine management system;
COO – Coordinator;
ICL – Instrument cluster;
TCO – Tachograph system

ATA, WTA, CTS and AUS – Auxiliary heater system, Clock timer system, Radio;
OPC and RET – Gearbox management system;
SMS – Suspension management system;
RTI – Road traffic information;
TPM – Tyre Pressure Monitoring;
LDW – Lane Departure Warning;

转载请注明来源:Scania VCI1 Diagnostic Tool 斯堪尼亚诊断工具 Trucks Buses