Xhorse VVDI MB BGA TOOL
1. Frequently online update
2. Support Benz key,read password and prepare new key via IR.
3. More necessary functions for Benz key programming
Xhorse VVDI MB BGA TOOL
Xhorse VVDI MB BGA TOOL Function Introduction:
1. Support BE key, read password and prepare new key via IR.
2. NEC V051,V057 support on board get password
3. All NEC keys support on board write and erase
4. Password calculate:support BGA keys,NEC keys(include 51,57version)etc.,work fast.
5. Support renew EIS and ELV
6. Support write EIS and ELV
7. Support online generate key file
8. Unlock ELV function will be released soon.
9. Renew other control modules function will support soon
1. If you have bought Condor key cutting machine (SL252 IKEYCUTTER CONDOR XC-007 Master or SL273 Original iKeycutter CONDOR XC-MINI ), you can buy SK185-B at 1200usd Only
2. It Supports Password Calculator Function. Each time will cost 44.99USD. It takes 4 minutes to collect data, and 2 minutes to calculate.
3. Not Support All Key Lost
4. On March 2nd, VVDI MB Tool add these two cables: Gear lever ECU Refresh Diagnostic Cable (the first cable of the following picture)
and Gearbox ECU Refresh Diagnostic Cable(the last cable of the following picture).
VVDI Benz BGA Tool Customer Feedback:
1. I test password from 212 new model super
good tool need pay 2 tokens
need 10 min all ok
2. Do you have see video of this tool?
They say can do all key lost on w212.
No tool can do it even Mehaco or nec pro51.
w212 eis on video, sure it can.. mehaco/mercedesinstrument can do all keys lost on w212.. the option is availible a few months..
VVDI MB TOOL Latest Version V2.0.7 Update(2016-02-26)
Require firmware V2.0.7
===== BENZ V2.0.7 =====
1. Attention: All user update device to firmware v2.0.7, software v2.0.7, the lower version dont support password calculation
2. User manual v1.2 released, overview v1.3 released
3. Add support for renew ECU/Gearbox/ISM etc
4. Fix diable key in K-Line protocol
5. Fix clear TP in K-Line protocol
6. Fix read key bug in password calculation
VVDI MB TOOL Latest Version V2.0.6 Update(2016-01-16)
Require firmware V2.0.6
===== BENZ V2.0.6 =====
1. Attention: All user update device to firmware v2.0.6, software v2.0.6, the lower version dont support password calculation
2. User manual v1.1 released, overview v1.2 released
3. Add support for disable key
4. Fix bug for test W164, W221 EIS status
5. Fix bug for write EIS data
SK185 VVDI – MB TOOL V2.0.5 Update
1. Attention: All user update device to firmware v2.0.5, software v2.0.5, the lower version dont support password calculation
2. Add password calculation for lost all key. Support W166, W246, W212, W212(old). After success find password, it will need pay 2 calculation times
3. Password calculation with working key support: add working key test before data acquisition
4. Add EIS status test, working key test function
5. Fix bug for OBD read W203, W639, W463(K) EIS
6. Autodetect W212 EIS with ELV
7. Fix bug for read v51 key password via NEC adaptor
8. Add IR repair key function
Support Key Types Display:
Latest Technical Details:
VVDI MB BGA tool update goes well, the following workable models are for reference only.
Model Support IR/OBD:
W164, W164 2009+
A166, W197,W212, W218, A246
A169, W209, W211
W172, W204, A207
W204, W207, W212 only by dump
W209 only by dump
Keys Version Supported:
v03, v06, v08
v05, v07, v09
1. VVDI-MB TOOL device
2. IR adaptor
3. USB cable
4. NEC adaptor 1
5. NEC adaptor 2
6. NEC adaptor base PCB
7. K Line in OBD line
8. OBD line
Package List Diisplay:
Q: I test read data with obd2 210 k line working and 204 car read with obd 2 ,but 211 not read with obd2 cable connect
pin 1 : ESL 1
pin 2 : GND
pin 3 : +12V (30)
pin 5 : CAN L (White)
pin 6 : CAN H (Green)
pin 7 : CAN L
pin 8 : CAN H
Can any one test?
A:Read eis via obd for W164, W169, W211, W209, require gateway connected
转载请注明来源：Original Xhorse V2.0.7 VVDI MB BGA TooL Benz Key Programmer Including BGA Calculator Function